-
About Us
-
-
Certifications
-
-
Contact Us
Blog
Blog
What happens when a graphite heat exchanger develops a leak?
Release time:
2021-12-27
Graphite heat exchanger is one of the graphite equipments that we commonly use nowadays, and we should pay attention to some matters when installing it, because it is easy to be damaged if it is not installed correctly. Among the installation location requirements are:graphite heat exchanger should be placed on the bracket that meets the height requirements and should be reliably balanced, in addition, a purge valve should be installed to prevent parking and purging to avoid accidents.
We are surrounded by more and more environmental protection equipment, because the pollution caused by the production of more and more serious, environmental protection equipment has also brought a lot of convenience and speed to our lives. It is important to know that graphite has many characteristics, especially in the purification of this piece, which also plays a very important role.
Graphite heat exchanger is now one of our commonly used graphite equipment, the installation should pay attention to some matters, because the installation is not correct is easily damaged. Among the installation location requirements are:graphite heat exchanger should be placed on the bracket that meets the height requirements and should be reliably balanced, in addition, a purification valve should be installed to prevent parking and purification to avoid accidents.
Installation of nuts:The purpose of sealing is realized by tightening the main bolts so that they are pressed against each other. Special care should be taken on the sealing surfaces, and when tightening the main bolts, the specified tightening torque should not be exceeded until good sealing properties have been restored. When tightening the bolts, they should be tightened several times diagonally and symmetrically in a gradual manner, the force should be even, and tilting to one side is not allowed to achieve good sealing effect. It is easy to loosen the bolts after transporting and moving, so the equipment should be carefully inspected and adjusted before installation.
With the rapid improvement of the production level, more and more new materials began to appear in our production, many materials have their own characteristics, used in our production, the effect is very effective, graphite we should be familiar with, it exists in many equipment and materials.
Graphite heat exchanger is the equipment to process graphite material, and its appearance meets the market demand for graphite. However, if something goes wrong, it will greatly affect the characteristics of graphite. When there is a problem of two-phase media leakage, first check whether there is any problem with the graphite quality, then check whether the graphite heat exchanger rubber is normal, whether there is any dissolution, aging or deterioration, and the impact of the drive may come from heat or water hammer.
Solution:Quality problems need to be replaced, the adhesive needs to be reapplied, the impact needs to be balanced and drained in advance, graphite tube breakage may be the problem of starting and stopping the equipment feeding fast during operation. Solution:Ensure smooth operation, system vibration, poor logistics lead to unstable operation. Solution:Adjust the balance of material and system operation before operation, as long as the problem is found, it is easy to solve the graphite heat exchanger failure, correctly solve the problem.
Key words:
Previous:
Related News
BETTERS' GRAPHITE
Company Address:
No. 16, Jiangtong North Road, Gangzha District, Nantong City, Jiangsu Province
Contact: MR.He
Mobile: 86-13348070880
Main products:
QR Code